Aop 104a Driver Download
Insert the card into one of the empty PCI slots, just as how you would install a sound card. Then turn on the computer. Your computer should recognize the new harddware, then choose installing the driver from CD. The capture card should be recognized as "IMAVISION Video Capture Device" and "IMAVISION Audio Capture Device." See "Installation Guide.doc" for details on hardware installation. This program is tested to be compatible with Windows 98 and newer versions including Windows XP.
Aop 104a Driver Download
Yes these drivers are located on the pico disk. Copy them and paste them into your C:\WINNT\system32\drivers folder (for windows 2000) Then reboot and install the english pack app. then if you try and open the program again it might say "key not found" install the DVR card into your machine now and then open the program again. Your program will now find the "Key" on the card, and it will work.
In a working KNOWN GOOD configuraiton with a single card, the Star Imavision Video Capture drivers used IRQ 10. The KG test system used an old Intel Pentium III motherboard. Use the following as a reference:
Center Link International offers a 30 day shareware trial of their finalized Pico 2000 software. They describe their PICO2000 1.9 ORS as a software only product for use with UCC4 type capture cards. This trial version may be downloaded from their website.
The software works with the UCC4 cards even if device drivers are not loaded for the cards in Windows. This has been reported to be true for all versions of Pico2000, however, it is verified for version 1.9 that loading of the device drivers are not necessary.
There's a theoretical work around to the problem Use VMware. Create a virtual instance of Windows and then install Pico on the virtual instance. To a VMware instance of Windows, all device drivers are the same without regards to the actual hardware of the system. This way if you find you have to replace a key piece of hardware, your licensed version of Pico will, theoretically, not be invalidated.
Note: Many of the download links on their site are broken. No Dico version is available from the web site that supports more than 4 cameras, despite rumors on some cctv forums. It is unclear what the other versions being offered were for specifically.
The Dico software uses different drivers for the cameras as does the PICO software. The two are not compatible. Do not try to install Dico on a system that was configured for Pico. It is recommended that you do a clean install of Windows first before switching from PICO to DICO. If a clean Windows install is not practical, it is recommended that you uninstall all previous capture card drivers. 350c69d7ab