Cara Overclock Prozessor Intel Software - |TOP| Downloads.
Intel Extreme Tuning Utility (Intel XTU)One exceptionally robust overclocking tool is Intel XTU. This software combines some of the most important features you want when overclocking into a single application.
Cara Overclock Prozessor Intel Software - Downloads.
How to Use Intel Performance Maximizer?Before beginning installation, disable all overclocking software. If you have previously changed your BIOS settings, refer to pages 7-8 of the Intel Performance Maximizer user guide to restore them to defaults.
We'd always recommend going through the BIOS of your motherboard to apply an overclock, which can usually be achieved automatically. On how to enter your motherboard BIOS (usually pressing the delete key during startup), be sure to check your motherboard manual. For the sake of this guide, we'll use Intel's Extreme Tuning Utility (XTU) tool to overclock the CPU. You can download this free software here.
The steps involved in overclocking an AMD CPU are largely the same as with Intel chips. The software, however, is different. We recommend using either the BIOS or AMD Ryzen Master tool for beginners. You can download the latter here. The Ryzen Master software works well with many AMD chips, but those using a relatively older AMD processor (released before 2017) can use the AMD Overdrive tool instead. It's very similar to the Ryzen Master tool, so the steps will remain mostly the same.
As a part of the beginner's guide, we'll only look at the basic options. The first thing you need to do is switch the "Control Mode" from "Manual." This will allow you to manually adjust clock speed and voltages for overclocking. AMD Ryzen Master will allow you to adjust the clock speeds directly without having to use multipliers. Once again, we recommend adjusting the clock speeds in increments of 50MHz. You can hit the "Apply & Test" after each increment to allow the software to boost and test.
Overclocking requires changing several system settings, like voltages and clock speeds. You can do software overclocking inside Windows 10 and Windows 11 with utilities like Intel's XTU or AMD's Ryzen Master, or you can enter the values directly into the system BIOS/UEFI. It's pretty simple to enter the BIOS to overclock; on the majority of platforms, you simply reboot the system and click delete or F2 repeatedly as it restarts. Both approaches have their strengths and weaknesses. Software overclocking in Windows is a bit simpler because it uses standardized naming for the various settings, whereas motherboard makers often use different names for the same settings (luckily, the BIOS tends to have a short descriptor for each option). Additionally, overclocking in Windows allows you to make changes in real-time. In contrast, changing the values in the BIOS requires a system reboot before you see the impact. Overclocking your CPU in the BIOS does have one big advantage, though: There are far more fine-grained options available for more advanced tuners. Most die-hard overclockers stick with BIOS overclocking and use software tools for monitoring. It is important to save your BIOS settings before you make changes. Overclocking your CPU is a trial-and-error process, so you might need to restore these settings several times. Most motherboards let you save your settings to a profile you can later restore, and you can assign simple names to keep track of multiple profiles. If you dial in good overclocked settings but would like to push even higher, it makes sense to save a profile so you can easily revert to a known-stable configuration if needed. While the names for certain settings can vary somewhat based on your motherboard vendor, the major manufacturers (Asus, ASRock, Gigabyte, and MSI) all include a wealth of options to overclock your CPU with their enthusiast-class boards. You can go as deep as you want on a top-tier motherboard, but the basics aren't nearly as daunting as the wealth of options might suggest. There are a plethora of settings and voltages you can manipulate for overclocking. For the scope of this article, we'll only focus on the basic settings that you'll need to get your overclock up and running. We'll refer to these basic settings in the following sections, but we have also provided a glossary of other key BIOS terms at the bottom of the article for your reference.
AMD defines three types of power limits for its chips: PPT is the maximum power consumption allowed, TDC is the maximum sustained current, and EDC is the maximum burst current. You can override those settings either manually or with AMD's PBO. You can access this feature via either the BIOS or Ryzen Master software when you overclock in Windows 10 or Windows 11.
ASUS AI Overclocking is an intelligent utility that helps you get the most out of your build by automatically profiling your CPU and cooling system to predict optimal voltage and frequency settings. Accessible via the AI Suite software in Windows or directly through the UEFI, the intuitive AI Overclocking user interface enables users of all levels. A range of customizable settings are available for seasoned overclockers, and an auto-tuning option is available for beginners.
Since this is a software overclocking tool, it doesn't pose too much of a risk, but as always in this arena, proceed with caution and I am not responsible for imploding machines. Bugs in clock time have been reported but fixes are coming. To go back to your old clock speed, you'll just need to reboot.
ROG Strix Z590-F Gaming WiFi is armed with up-rated power delivery and optimized cooling to enable top-tier performance for gaming. Fully equipped with intelligent controls for easy management of overclocking, cooling and networking settings, Strix Z590-F Gaming WiFi also features Two-Way AI Noise Cancelation for crystal-clear in-game communication.
The easiest way to ensure memory overclocking stability is by using the MemTest software. Even with the free version you can open multiple instances of the software and allocate all the available memory to the software.